Close up view of headstock after Rosewood slab fingerboard has been glued on. Note there is no radius on the fingerboard at this stage.
	Another view of rough cut necks with fingerboards glued on.
	Side viewof the same building, showing our address.
	View along the grassy side of the primary building, looking from the sidewalk along Fender Avenue.
	View along alley between our two buildings. Note the large vacuum and pipes that pull dust from the Wood Shop and deposit it in the dumpster.
	View inside the Case Warehouse. Those are pallets of G&L cases from either SKB or G&G.
	View of vacuum tables used to hold tops in place as the glue sets between the tops and bodies.
	Close up view of a vacuum table in use.
	View of Mahogany bodies with Maple tops glued on. The vacuum tables perfectly contour the top to the body as seen on the arm contour.
	Close up view of the compressor powering the vacuum tables.
	Another close up view of a vacuum table in use. Note how tightly the rubber surface is pulled around the bodies inside.